4:4
UGG050-0517
S Series
INST
ALLING
1. Check that all actions in page 4:1–4:3 are done.
2. Check that all parts of the safety equipment are
installed. >Page 2:14 “Safety equipment.”
3. Close the granulator. >Page 6:3.
4. Start the granulator. >Page 5:1.
5. Check that the rotating direction of the granulator’s
motor corresponds to the arrow on the motor.
If the rotating direction is wrong:
a) Stop the granulator. >Page 5:1.
b) Read page 4:3 “General rules, Electrical connec-
tion”.
c) Switch over two incoming phases.
d) Start the granulator. >Page 5:1.
6. Optional equipment, IMD-system:
Check that the IMD settings are satisfying. Adjust as
necessary. >Page 7:4 “Adjust the IMD-System”.
7. Optional equipment, ABS-system:
Check that the ABS settings are satisfying. Adjust as
necessary. >Page 7:5 “Adjust the ABS-System”.
8. Optional equipment, Level switch:
Check that the level switch’s setting is satisfying.
Adjust as necessary.
>Page 7:7 “Adjust the level switch”.
9. Optional equipment, Airveyor:
Check that the pause-pulse relay’s setting is satisfy-
ing. Adjust as necessary. >Page 7:8.
10. Check the emergency stop(s). >Page 7:1.
11. Check the safety equipment. >Page 7:2.
12. Check the knife clearance. >Page 7:15 point 5.
4. INSTALLING
Checks immediately after first start