7:10
UGG050-0517
S Series
(A)
(B)
(C)
(D)
(E)
SER
VICE
7. SERVICE
1. Read page 7:1 “General rules, Service”.
2. When granulating material that generates dust:
– Clean the granulator’s parts once every day or at
least once every week.
In normal operation:
– Clean the granulator’s parts at colour change or at
least once every 300 hours.
3. Open the granulator. >Page 6:1–6:3.
4. Clean the granulator parts. Use a vacuum cleaner.
Clean following parts inside and outside: Funnel,
Hopper*, Flap(s), Cutter housing and Granule bin.
Important! Do not use compressed air and a blow gun,
since granulate and plastic residue could be blown
into safety switches. Granulate and plastic residue can
make the floor slippery.
* Important! Do not use solvents or strong detergents
when cleaning a PC hopper!
5. Close the granulator. >Page 6:3–6:5.
Important! If the rotor is stuck, rotate the rotor in the
reverse direction, if necessary tap carefully with a
piece of wood. Never use any metal object when
trying to release the rotor.
Important! If the hopper, cutter housing and/or
granule bin are filled with compact, melt plastic
residue, Conair’s service line at 1-800-458-1960
must be contacted for service.
Clean the granulator
(A) = Funnel
(B) = Hopper
(C) = Flap(s)
(D) = Cutter housing
(E) = Granule bin