(F)
(E)
(A)
(B)
(C)
(D)
6:4
UGG050-0517
S Series
OPEN / CLOSE
Close the cutter housing
1. Read page 6:3 “General rules, Close the granulator”.
2. Read page 2:9 “Cutter housing”.
3. Remove the piece of wood that locks the cutter
housing’s upper frame.
4. Close / fold down the cutter housing’s upper frame.
Note! Hold the handle while opening / closing the
cutter housing’s upper frame, so it does not fall
uncontrolled.
5. The cutter housing is closed.
Close the hopper
1. Read page 6:3 “General rules, Close the granulator”.
2. Read page 2:15 “Funnel, Hopper”.
3. Read page 2:17 “Safety switch” and “Star knob”.
4. Close the cutter housing. >Page 6:4.
5. Close / fold the hopper forwards.
Note! Hold the hopper while opening / closing it, so it
does not fall uncontrolled.
6. Fit the switch key into the safety switch.
7. Tighten the hopper’s star knob(s).
8. The hopper is closed.
6. OPEN / CLOSE
Close the granulator
(A) = Hopper
(B) = Star knob, Hopper
(C) = Switch key, Hopper
(D) = Safety switch, Cutter housing
(E) = Handle, Cutter housing’s upper frame
(F) = Piece of wood, Cutter housing’s upper frame