2:30
UGG050-0517
S Series
S918
(A)
(A)
DESCRIPTION
Program 2, Masher-system
Operation in accordance with “Program 2” decreases the
stress on the Masher-system and gives the rotor time to
empty the cutter housing.
The operation of “Program 2” can be described as
follows:
1. Masher-system stops for 15 seconds.
2. Masher-system re-starts and operates in backward
going direction for 5 seconds.
3. Masher-system stops for 15 seconds.
4. Masher-system re-starts and operates in backward
going direction for 5 seconds (if the rotor also is stuck
it too will reverse at this stage).
5. Masher-system stops for 15 seconds.
6. Masher-system re-starts and operates in forward going
direction for 10 seconds.
7. Masher-system stops for 15 seconds.
8. Masher-system exits “Program 2”.
Note! When “Automatic ABS” mode is selected:
After exiting “Program 2” the Masher-system will
operate in forward going direction, until the Masher-
system gets stuck and stops three times in a row during a
short period of time.
Note! When “Timed ABS” mode is selected:
After exiting “Program 2” the Masher-system will
automatically initiate “Program 1”.
>Page 2:32 “Program 1, Masher-system”.
2. DESCRIPTION
ABS-system
(A) = Masher-system