2:4
UGG050-0517
S Series
(D)
(E)
(F)
(G)
S910
S914
(C)
(A)
(B)
(C)
(H)
DESCRIPTION
Conair S Series
Conair S Series granulators are low speed granulators,
designed to granulate, injection moulded or blow
moulded plastic residue, directly adjacent to an injection
moulding or a blow moulding machine.
The function of the granulator can be described as
follows:
1. The plastic residue, which must be free from metal
and contamination, is fed into the granulator’s funnel.
2. The plastic residue falls through the hopper and down
into the cutter housing.
Information! The granulator can be provided with an
Masher-system. The Masher-system is pushing the
plastic residue down to the cutter housing.
3. The cutter housing contains fixed knives and a rotor.
Rotating knife segments are mounted on the rotor. The
rotor is also provided with one or several rotating feed
hooks. The plastic residue is caught by the rotating
feed hook(s) and granulated (cut up) between the
rotating knife segments on the rotor and the fixed
knives in the cutter housing. The cutter housing is also
provided with scrapers. The scrapers prevent finished
granulate from rejecting. Rotating knife segments,
rotating feed hooks, fixed knives and scrapers must be
reversed, grinded or replaced as necessary.
Important! The granulator must never be used with
blunt knives. Blunt knives cause abnormal wear and
damages the granulator.
4. The size of the granulate (the cut up plastic residue) is
determined by the comb size of the knives and the
scrapers. The knives and scrapers can easily be
changed to give the required granulate size.
5. The granulate passes through the cutter housing down
to the granule bin, which collects the finished granu-
late.
6. The granule bin can be emptied manually or by means
of an airveyor.
2. DESCRIPTION
Function
(A) = Funnel
(B) = Hopper
(C) = Cutter housing
(D) = Rotating knife segments
(E) = Rotating feed hook
(F) = Fixed knives
(G) = Scrapers
(H) = Granule bin