2:8
UGG050-0517
S Series
S97
S910
S914
(B)
(C)
(A)
DESCRIPTION
The rotor is designed and adapted to the type of plastic
residue that the customer has specified before order.
>Page 9:25 “Rotor”.
The Rotor(s) can be controlled by means of an “ABS-
system”.
>Page 2:28 “General rules, ABS-system”.
>Page 2:29 “Automatic ABS, Rotor”.
>Page 2:30 “Timed ABS, Rotor”.
Rotating knife segments
Rotating knife segments are mounted on the rotor. The
rotor can be provided with 2, 3, 4, 5 or 9 segments of
rotating knife segments, depending on type of cutter
housing.
>Page 2:9 “Cutter housing”.
The rotating knife segments must be replaced or grinded
as necessary. The granulator must never be used with
blunt knives. Blunt knives cause abnormal wear and
damages the granulator.
> Page 9:26-9:28 “Rotating knife”.
> Page 7:14 “Install the rotating knife segments and the
rotating feed hook(s)”.
> Page 7:16 “Grind the rotating knife segments”.
Rotating feed hook(s)
The rotor is provided with one or several rotating feed
hooks. The rotating feed hook(s) is/are mounted between
the rotating knife segments. The rotor can be provided
with 1, 2, 3, 4 or 7 rotating feed hooks depending of type
of cutter housing.
>Page 2:9 “Cutter housing”.
The rotating feed hook(s) is/are reversible. This means
that the rotating feed hook(s) can be reversed once before
discarding is/are necessary.
> Page 9:26-9:28 “Rotating feed hook(s)”.
> Page 7:14 “Install the rotating knife segments and the
rotating feed hook(s)”.
Rotor
2. DESCRIPTION
(A) = Cutter housing
(B) = Rotating knife segment
(C) = Rotating feed hook