. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-22
Installing the Compaq ProLiant 5000 Server
Writer: Compaq Project: Installing the Compaq ProLiant 5000 Server Comments:
File Name: F-ch2.doc Last Saved On: 4/18/97 5:09 PM
External Storage
Optional mass storage devices can be connected to the Compaq ProLiant 5000
by using the External Fast-Wide SCSI-2 Port on the back of the unit, or the
Fast-Wide SCSI-2 Port on the optional Fast-Wide SCSI-2 Controllers.
IMPORTANT: If you use the external port, you must disconnect the cable for the
internal drives and connect the cable for the CD-ROM drive to the internal narrow
SCSI connector.
Connecting Peripheral Devices
After all options have been installed and the Side Access Panel has been
replaced, peripheral devices should be connected. Icons on the back of the
unit identify the function of each connector.
Figure 2-18. Connectors on the back of the ProLiant 5000
CAUTION: To avoid damage to the server, ensure that the power is OFF
before you plug in or unplug the keyboard cable from the server.
