. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-24
Server Management
Writer: Project: Server Management Comments:
File Name: N-ch10.doc Last Saved On: 4/23/96 11:31 AM
Remote Option Settings for Booting into Compaq Utilities
Continued
Option
Setting
Description
Network IP net
mask
Enter the net mask for this server in standard
dot notation.
NOTE: This is not used if you select Custom for
network controller. You must enter your IP
address in the NET.CFG file that you load into
the system partition.
Network IP
router address
Enter the router to be used for this server in
standard dot notation.
NOTE: This is not used if you select Custom for
network controller. You must enter your IP
address in the NET.CFG file that you load into
the system partition.
If you configure the server to restart into the Compaq Utilities, the server
prepares for remote communications, so you can remotely run Diagnostics
software, Inspect Utility, or System Configuration Utility using a workstation
running terminal emulation software (such as Insight Manager or PC
Anywhere).
