. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-9
Compaq ProLiant 5000 Servers Reference Guide
Writer: Compaq Project: Installing the Compaq ProLiant 5000 Server Comments:
File Name: F-ch2.doc Last Saved On: 4/18/97 5:09 PM
Installing an I/O Expansion Board
EISA expansion slots accept both EISA and ISA boards. Refer to Figure 2-6
above to identify boards by their connectors.
Follow these instructions to install an expansion board:
1. Remove screw and slot cover from the required expansion slot(s).
2. Remove any extender brackets from PCI boards to be installed in the
top four slots (slots 5-8).
3. Align the connector on the board with the expansion slot and firmly
press the expansion board into place.
4. Secure the board by replacing the screw removed in Step 1.
Figure 2-7. Installing a PCI expansion board (extender bracket attached,
right foreground)
