. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12-3
Compaq ProLiant 5000 Servers Reference Guide
Writer: Project: Security Comments:
File Name: P-ch12.doc Last Saved On: 4/22/97 1:14 PM
IMPORTANT:
You can set up and change the QuickLock hot key combination
(Ctrl +Alt+L) if it conflicts with your application software. To change the hot key
combination, you must have installed the KP Utility in your server. Refer to your MS-DOS
documentation for information on this utility.
You cannot access the application, but it remains in view on the monitor. To
re-enable the input device interface and bring the application to the screen,
type the Power-On Password that you established in the Compaq System
Configuration Utility, and press Enter.
Password Security
You can maintain Power-On and Administrator Passwords on your server.
Administrator Password
Establishing the Administrator Password through the Compaq System
Configuration Utility prevents changes to the configuration unless the
Administrator Password is entered. When running the Compaq System
Configuration Utility, the Administrator Password icon displays.
Establishing a Password
The Power-On and Administrator Passwords are established in the Compaq
System Configuration Utility and are entered and changed in similar fashions.
To establish the Power-On or Administrator Password, follow this procedure:
1. Boot up on the Compaq System Configuration Utility.
2. When the main menu displays, select Configure Hardware and press
Enter.
3. Select Step 3: View or Edit Details and press Enter.
4. Use the arrow keys to select Set Power-On Password or Set
Administrator Password as applicable, and press Enter.