. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-13
Compaq ProLiant 5000 Servers Reference Guide
Writer: Compaq Project: Special Features of Compaq ProLiant 5000 Servers Comments:
File Name: I-ch5.doc Last Saved On: 4/18/97 6:33 PM
Terminator Board
Two slots, slots 9 and 10, on the I/O board are dedicated to processor boards.
Both slots must be occupied. In single-processor board configurations, the
processor board is installed in slot 9. A terminator board must be installed in
slot 10. If a terminator board is not present, the system will not start. Remove
the terminator board to install a second processor board following instructions
that accompany that option.
Figure 5-12. Terminator board
