manualshive.com logo in svg

Compaq ProLiant 5000, Reference Manual, Page: 230 / 266

Share
Download
Compaq ProLiant 5000 Reference Manual Download Page 230

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

A-4    Using the Internal CD-ROM Drive

Writer:    Project:  Using the Internal CD-ROM Drive Comments:

File Name: R-appa.doc Last Saved On: 4/22/97 1:17 PM

CD-ROM Drive Care
and Safety Precautions

Use the following precautions listed below to install, operate, or transport your
CD-ROM drive.

  Installation

Avoid placing the drive in a location that is subject to high humidity,
extreme temperatures, mechanical vibration, or direct sunlight.

Always use the drive in a horizontal or vertical orientation.

  Operation

Do not move the drive while it is operating. Moving it while it is
operating cause it to malfunction.

Avoid exposing the drive to sudden changes in temperature. Sudden
changes in temperature can allow condensation to form inside the unit,
causing it to malfunction.

Do not drop the disc or subject it to shock.

  Transportation

Remove any CD before moving the drive.

If you remove the drive from the computer, repack the drive in the
original packing materials.

  Safety

If any object or liquid falls into the CD-ROM drive, immediately unplug the
computer, server, or desktop expansion base and have it checked by an
Authorized Compaq Service Provider.

Summary of Contents for ProLiant 5000











































































































































































































































































Reviews:

No comments