. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-19
Compaq ProLiant 5000 Servers Reference Guide
Writer: Project: Server Management Comments:
File Name: N-ch10.doc Last Saved On: 4/23/96 11:31 AM
Table 10-3
Compaq System Configuration Utility
Pager Settings for Starting into Compaq Utilities
Pager Data
Setting
Description
Pager status
Enabled
Indicates if the pager feature is
enabled or disabled.
Pager dial string
ATDT 555-5555
Indicates the pager dial string and
delay before the pager message.
Pagers typically use one of the
following formats:
Local pagers: ATDT 555-5555,,
Wide area pagers: ATDT 1-800-555-
5555,,,,,1234567#
Pager message
1234567#
Represents a unique number
(maximum seven digits, numeric only)
that you must designate to identify the
server on your pager display. The ROM
adds a three-digit code to the front of
this number. The first two indicate the
subsystem and the third indicates the
severity of the error that caused the
alert. The # symbol usually terminates
the message. If no message is
required, delete the # symbol.
Pager test
Select to test
pager setup
Use this to test the current pager
settings. Press Enter to dial the pager
number, and the pager message (if
present) displays. You must configure
the computer before testing the pager
and the Pager Status must be set to
Enabled. Do not test the pager if you
are running remotely and are only
using one modem.