. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-2 Switch Settings
Writer: Project: Switch Settings Comments:
File Name: U-appd.doc Last Saved On: 4/22/97 1:23 PM
Processor Board Switches
ProLiant 5000 servers have five switch banks on each processor board. Tables
D-2 and D-3 explain possible toggle settings for Switch banks 3, 4 and 5.
Setting the Voltage ID
CAUTION: Setting the voltage ID switches incorrectly can result in
damage to the processor if the voltage ID is higher than the processor is
designed
to receive.
Switch banks 1 and 2 on both processor boards control processor voltage
settings. The default settings on both switches is OFF. Instructions for any
setting change for Switch 1 or Switch 2, if required, would accompany
Compaq processor options or spare parts.
Setting the Bus Frequency
Switch bank 3 regulates processor bus frequency. Table D-2 provides Switch
bank 3 (SW3) settings. Switch bank 3 is located between the two processor
sockets on each processor board.
Table D-2
Switch Bank 3 Settings
Bus Frequency
Pentium Pro Frequency
Switch 1
Switch 2
50 MHz
Off
Off
60 MHz
Off
On
66.66 MHz (default)
On
Off
Reserved
On
On
