Compaq LTE Elite Maintenance And Service Manual Download

Page: 9 / 387

o The following preinstalled software:

- MS-DOS and Microsoft Windows

- TabWorks utility (alternative to Program Manager)

- Computer Setup, Computer Checkup, Power Management, and Security

Management utilities

- Automatic PCMCIA configuration utilities for MS-DOS and Windows

- Windows-based online documentation

- Plug and Play BIOS

- MS-DOS- and Windows-based shutdown capability (for closing out

applications and turning off computer)

- Microsoft Video for Windows Runtime Version

- Adaptec 6360 SCSI drivers

- Universal Netware Client for simplified setup of a Netware network

- Intel Ethernet drivers and TI Token Ring drivers for networks other

than Netware

- Western Digital WIN graphics drivers

- Logitech Trackball drivers

1.4 Controls And Leds

This section covers the computer controls and LEDs (Figure 1-3).

Summary of Contents for LTE Elite




































































































































































































































































































































































































Search results

Summary of Contents for LTE Elite

Reviews:

Related manuals for LTE Elite

Brands by name

Popular brands

Compaq LTE Elite, Maintenance And Service Manual

Search results

Summary of Contents for LTE Elite

Reviews:

Related manuals for LTE Elite

Brands by name

Popular brands