EXTender 1100A Switch and Remote Module System Administrator’s
Guide
93
The registration number of the system must be provided so that the telephone company
can ascertain intended modes of operation and verification of the registration port.
If a need arises in the future the telephone company will call the user and request the
following information for any equipment being connected to the Public Switched
Telephone Network:
Manufacturer
:
Citel Technologies
Model Number
:
E-1100A. Refer to nameplate on the bottom of the unit
FCC Registration Number
:
Refer to the nameplate on the bottom of the unit
Ringer Equivalence Number:
(REN): 0.1B
Facility Interface Code:
(FIC): 02LS2
Universal Service Order Code
: (USOC):
RJ11C
Telephone plug(s)
:
RJ11
The Ringer Equivalence Number (REN)
The FCC Registration Label, found on the bottom of the unit, includes the REN. This
number is a representation of the electrical load that will be applied to your telephone line
once the unit is plugged into your wall jack. The telephone line serving your premises will
not operate properly if the total ringer load exceeds the capability of the telephone
company central office equipment. That is, if too many ringers (or their equivalent) are
connected to the line, there may be insufficient energy to ring your telephones or activate
other equipment. If the ringer load is excessive, you may also have difficulty dialing
telephone numbers.
Problems, Repair and Warranty
Should you experience trouble with this telephone equipment or for repair or warranty
information, please contact Citel Technologies, at 1-888-454-5828. If the equipment is
causing harm to the telephone network, the telephone company may request that you
disconnect this equipment from the line network until the problem has been corrected.
Industry Canada Statements
This digital equipment does not exceed Class B limits for radio noise emissions from
digital apparatus, set out in Radio Interference Regulation of Industry Canada. Operation
in a residential area may cause unacceptable interference to radio and TV reception
requiring the owner or operator to take whatever steps necessary to correct the
interference.
Models E-1100A
This product meets the applicable Industry Canada technical specifications.
When equipped with the Analog port, a Registration Number is printed on the product
nameplate, located on the bottom of this equipment. This certification means that the
equipment meets certain telecommunications network protective, operations, and safety
requirements as prescribed in the appropriate Terminal Equipment Technical
Requirements document(s). The Industry Canada does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment must
also be installed using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent degradation of service
in some situations.
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
