EXTender 1100A Switch and Remote Module System Administrator’s
Guide
59
Advanced IP Parameters – DNS
This parameter allows the System Administrator to find the Remote Module by an
assigned name. Domain Name Server (DNS) is used in IP networks for translating a host
domain name into an IP address. This information is stored in a DNS server. The
information for these fields should be obtained from the corporate IT Manager. Enabling
DNS on the Remote Module allows the System Administrator to search for it by its name
and/or IP address. The DNS parameter is NOT enabled by default. The Remote Module
DNS (Domain Name Server) configuration screen is shown below:
Path:
Remote->Configuration->IP->DNS
Figure 34: Remote Module – DNS Configuration Screen
1. Setting DNS to
Enabled
– ‘Yes’ will enable DNS and ‘No’ will disable DNS.
2. The
Server IP Address1
(to 4) – Enter the address(es) of the DNS servers up to 15
characters. This information should be obtained from the company IT Administrator
prior to configuring the unit.
3. Entering
the
Domain Name
– The domain name (i.e. Citel) is entered in this field to a
maximum of 20 characters. This information should be obtained from the company IT
Administrator prior to configuring the unit.
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
