EXTender 1100A Switch and Remote Module System Administrator’s
Guide
41
Please select your PBX type:
Definity ? [y/n] n
Magix ? [y/n] y
New PBX type is 'Magix'
Essential Connect Parameters - Modem Settings
3. Configuring
the
Modem Settings
– Set the Modem settings for connection to the
Switch Module from the Remote Module:
Path:
Gateway->Utilities->Setup_Wizard
Path:
Gateway->Configuration->Connec
TMI Path:
(Remote Only)->Set Config->Modem Menu->Leased Line
Figure 15: Switch Module – Modem Settings Configuration Screen
There is only one essential Modem Setting configuration for the Switch side and that
is the Telco type which is the Leased Line setting, using the default setting for
remaining Modem Settings should be satisfactory.
a)
Leased Line
– An analog leased line is a line type offered by the telephone
service provide (CO) and would be a dedicated line between the Switch and
Remote Module (not a “dialup” connection). Only ‘wet’ leased lines are supported.
A standard analog line (Leased Line disabled) is the default setting.
Essential Connect Parameters
The Connect Parameters on the Remote Module are for configuring the dial numbers and
internal modem settings.
Path:
Remote->Configuration->Connect
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
