EXTender 1100A Switch and Remote Module System Administrator’s
Guide
22
Command Keys
The Management Console (MC) uses command keys and cursor keys to navigate through
the sub-menus:
à
Key
à
Description
Cancel, leaving values at their previous settings.
Accepts the change you have entered or exits the current
menu option. The Administrator will also be prompted to
save configuration changes if required.
or
Access the currently selected menu item.
or
Go to an item in a menu. You can also select a menu
item by typing the first character in its name (“p” for Port,
for example).
or
+ A
Help screen. This help screen is for the UI itself and not
for the features listed within the UI.
or
+ R
Refreshes the current screen.
Table 2: Command Keys
Saving Changes
You will be prompted to save if you attempt to log out of the Management Console when
changes have been made. You will also be asked to confirm that you want to save
changes if you select the Save option. You may need to reboot the Switch Module or
Remote Module for your changes to take effect depending on the menu item
programmed.
Logging Out
When you have finished working in the Management Console, remember to logout.
If you have left FTP enabled, a warning message is displayed reminding you to disable FTP
access. You can choose to logout anyway, but leaving FTP access enabled is not recommended.
If FTP is disabled, a message is displayed asking you to confirm that you want to log out of the
Management Console.
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
