EXTender 1100A Switch and Remote Module System Administrator’s
Guide
84
Saving the Active Image File as the Default
Saving the active image file as the default:
2. Deletes the existing “default.mab” file on the unit
3. Renames the image that is currently live to default.mab
4. A copy of the current live image remains on the unit after the upgrade is complete
5. If the currently live image is “default.mab” the message “Currently running default
image” is displayed
This process requires the system to be rebooted and this will cause active phones to be
taken out of service for a few minutes.
Path:
Gateway (Remote) ->Utilities->Upgrade->Default Image
Type “[Y]es” to make the changes specified and reboot.
Figure 45: Default Image
Querying Flash File System
Before loading your new image file into the Flash File System, ensure that there is enough
free memory space for it. If the free space is less than 3,000,000 bytes, you must delete
files which are not in used by the system (see
Deleting Outdated Files
on the next page).
Path:
Gateway->Utilities->Upgrade->Free Space
Figure 46: Free Space
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
