EXTender 1100A Switch and Remote Module System Administrator’s
Guide
17
Removal
Refer to the instructions below when moving or removing the Switch Module and/or
Remote Module.
1. Power down the units
2. Disconnect the RJ-11 to RJ-11 Telco Phone Cable between the analog line and the
Telco port
3. Disconnect the RJ-45 from the LAN port
4. Disconnect the RJ-45 to RJ-11 cable between Port and a port on the PBX (Switch
Module)
5. Disconnect the RJ-45 to RJ-11 cable between the Phone port and a supported digital
set (Remote Module)
6. Disconnect the RJ-45 to DB-9 Console cable between the console port and the PC
communications (COM) port
7. Remove the unit(s) from the desktop or wall (if mounted)
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
