EXTender 1100A Switch and Remote Module System Administrator’s
Guide
38
Essential Configuration – Switch Module
Once the Switch Module and Remote Module are successfully connected the MC
(Management Console) allows for the configuration of the units according to the
requirements of the individual users. The following is a detailed description of the
programming areas that would be considered “essential” to the proper operation of the
Switch Module.
Do NOT connect the Switch Module to the PBX or connect the digital telephone to
the Remote Module until the Setup Wizard has been run. An improperly configured
Switch Module can cause damage to the PBX line card and an improperly
configured Remote Module can cause damage to the digital telephone set.
!
Essential Setup Wizard Configuration
There are two items that
must
be configured using the Setup Wizard:
•
The
Region
Code
•
The PBX Type
Path:
Gateway->Utilities->Setup_Wizard
1. Set the Region Code. Below is an example of a Setup Wizard configuration for
changing the Region code from Canada to the United States.
************************************************************
*********** We need to specify the Region Code ***********
************************************************************
Currently configured Region is 'Canada'
Do you want to select a new Region? [y/n] y
Enter your country code (? to list):?
<Country Code>:<Country>
43:Austria 32:Belgium 1:Canada 45:Denmark
358:Finland 33:France 49:Germany 30:Greece
39:Italy 31:Netherlands 351:Portugal 34:Spain
46:Sweden 41:Switzerland 44:United Kingdom 1:United States
Enter your country code (? to list):1
Country Canada? [y/n] n
Country United States? [y/n] y
New Region is 70, 'United States'
2. Set the PBX Type. Below is an example of a Setup Wizard configuration for the
setting the PBX Type to Meridian Protocol.
Document Number: M-1100A-MUC
Version: Rev AG
© Copyright 2008 Citel plc All Rights Reserved
