26
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter Restrictions and Caveats in Cisco IOS XE 3.6S Releases
Caveats in Cisco IOS XE 3.6S Releases
•
CSCty73528
Symptoms:
The router displays core dump files.
Conditions:
Occurs when you perform an RSP switchover when CEF routes are configured.
Workaround:
There is no workaround.
•
CSCty74058
Symptoms:
The router sends traffic for virtual circuits (VCs) over Gigabit Ethernet interfaces
instead of MPLS-TP tunnels.
Conditions:
Occurs when you perform an interface module OIR and the VCs are configured with a
preferred path as the MPLS-TP tunnel.
Workaround:
There is no workaround.
•
CSCty74062
Symptoms
: The router does not pass MLP traffic.
Conditions
: Occurs when you perform an RSP switchover with an existing MLP configuration.
Workaround
: There is no workaround.
•
CSCty74129
Symptoms:
A REP topology may reconverge during an RSP switchover. The consoles displays REP
no-neighbor messages.
Conditions
: Occurs when you configure REP between two Cisco ASR 903 Routers and you
perform an RSP switchover.
Workaround
: There is no workaround.
•
CSCty77704
Symptoms:
CFM traceroute fails between two CE devices.
Conditions:
Occurs under the following conditions:
–
There is a CFM xconnect between higher-level MEPs
–
The MEPs are between CE devices
–
The CE devices are in a different domain.
Workaround:
Disable CFM on the Cisco ASR 903 Router acting as a PE device.
•
CSCty79273
Symptoms:
Multicast replication does not occur on all BDI interfaces on a given trunk EFP.
Conditions:
Occurs under the following conditions:
–
The router is configured with 63 or more BDIs
–
The BDIs are configured as OIFs on a trunk EFP.
–
The port on which the EFP is configured is in a multicast group.
Workaround:
There is no workaround.
•
CSCty80326
Symptoms:
The router displays an Eamapper error.
Conditions:
Occurs under the following conditions:
–
The router is configured with a port channel interface with 2 member links.
–
The port channel