60
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.7S Releases
Conditions:
Occurs when you boot the router running QoS configurations at a high scale,
particularly queues.
Workaround:
There is no workaround.
•
CSCua12366
Symptoms:
The IOMD process corresponding to OC3 IM (interface module) crashes.
Conditions:
Occurs when you perform an IM OIR after the router has been passing traffic.
Workaround:
There is no workaround; the IM recovers after the crash and resumes traffic.
•
CSCua16143
Symptoms:
IPv6 BFD sessions drop after you perform an SSO.
Conditions:
Occurs when you perform an SSO on the router while running an IPv6 BFD
configuration. The issue does not occur with an IPv4 BFD configuration.
Workaround:
After SSO, perform a shutdown/no shutdown on the physical interface.
•
CSCua16492
Symptoms:
Some IPv6 multi-hop BFD over BGP sessions flap.
Conditions:
Occurs on port-channel interfaces running IPv6 multi-hop BFD over BGP sessions
after you perform an SSO.
Workaround:
There is no workaround.
•
CSCua25932
Symptoms:
Convergence caused by an interface flap takes more than 50 milliseconds.
Conditions:
Occurs when you enable BGP PIC core and LFA FRR at the same time.
Workaround:
Use LFA FRR, as it converges in less than 50 milliseconds for BGP VPNv4 prefixes.
•
CSCua33453
Symptoms:
A CFM configuration crashes after passing traffic for several hours.
Conditions:
Occurs when you create the following configuration:
–
A port-channel interface configured with an EVC and applied to a bridge-domain
–
A physical interface configured as a trunk EFP
–
The
offload sampling
command is configured on both interfaces
Workaround:
There is no workaround.
•
CSCua33788
Symptoms:
The router does not pass multicast traffic consistently; only some traffic passes.
Conditions:
Occurs when you configure 255 EVCs spanning across different slots on the router.
Workaround:
There is no workaround.
•
CSCua36065
Symptoms:
The router forwards multicast traffic on 63 out of 255 multicast output interfaces
(OIFs).
Conditions:
Occurs when you configure the following:
–
255 EVCs on a single port mapped to 255 BDIs (one EVC per BDI) using rewrite tagging.
–
255 BDIs which send IGMP v2 Joins to a single multicast group.
–
255 EVCs configured as a routed port with the port a member link of a port-channel.