Cisco ASR 1001 Hardware Installation Manual Download Page 638 | Manualshive

Page: 638 / 702

background image

Step 6

Once the power supply fasteners are loosened, grasp the handle with one hand and support the weight of power supply
with the other hand and pull the power supply out of the slot (see the following figure).

Figure 304: Removing the Cisco ASR 1001 Router AC Power Supply Cables

Step 7

Repeat the same steps to remove the AC power supply from Slot PS0.

What to Do Next

This completes the procedure for removing an AC power supply from the Cisco ASR 1001 Router.

Installing DC Power Supply into Cisco ASR 1001 Router

The Cisco ASR 1001 Router DC input connector is compatible with a pluggable Euro-style plug. The input
connector and plug must be UL recognized under UL 486 for field wiring. The connection polarity shall be
from left to right: negative (

–

), positive (+), and ground.

Cisco ASR 1000 Series Router Hardware Installation Guide

604

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers

Installing DC Power Supply into Cisco ASR 1001 Router

«
...
636
637
638
639
640
...
»

Summary of Contents for ASR 1001































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 1001

Brand: JCG Pages: 2

Brand: Keithley Pages: 59

Brand: E-Lins Pages: 113

Net2Air Ins-40085-US

Brand: Paxton Pages: 4

Brand: ZyXEL Communications Pages: 215

Brand: Schrack Technik Pages: 2

IPS Pro-Module-24C-GE-BP-TM

Brand: Trend Micro Pages: 3

Secure Site Manager 16

Brand: Black Box Pages: 16

Brand: ExtraHop Pages: 2

Wisenet PRN-6400DB4

Brand: Hanwha Techwin Pages: 125

Brand: B&B Electronics Pages: 2

Brand: Dinstar Pages: 103

Brand: Aaeon Pages: 100

Brand: Axis Pages: 30

Brand: Inter-m Pages: 20

Brand: Allied Telesis Pages: 2

Brand: ICP DAS USA Pages: 60

MagicLAN SWL-2000P

Brand: Samsung Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands