Cisco ASR 1001 Hardware Installation Manual Download Page 121 | Manualshive

Page: 121 / 702

background image

C H A P T E R

3

Cisco ASR 1000 Series Routers Embedded
Services Processors

The Cisco ASR 1000 Series embedded services processors are based on the Cisco QuantumFlow Processor
(QFP) for next-generation forwarding and queuing. The Cisco ASR1000-ESP5, Cisco ASR1000-ESP10,
Cisco ASR1000-ESP10-N, Cisco ASR1000-ESP20, Cisco ASR1000-ESP40, Cisco ASR1000-ESP100, and
Cisco ASR 1000-ESP200 provide centralized forwarding-engine options for the Cisco ASR 1000 Series
Aggregation Services Routers.

Additionally, the Cisco ASR 1002 Fixed Router includes a nonmodular, fixed embedded services processor
with a throughput of 2.5 Gbps and the Cisco ASR 1001 Router has a nonmodular, fixed embedded services
processor with a throughput of 2.5 Gbps, which is upgradable with a software activated performance upgrade
license to 5 Gbps.

The Cisco ASR 1000 Series embedded service processors:

•

Provide the centralized embedded forwarding services responsible for the bulk of the data plane
processing tasks. All network traffic through the Cisco ASR 1000 Series system flows through the
Cisco ASR 1000 Series Embedded Services Processors.

•

Are responsible for the data-plane processing tasks and all network traffic flows through them.

•

Support Forwarding Engine Control Processor which provide hardware abstraction layer between the
QFP-based forwarding engine and other system components, allowing datapath and management
functions to be independent.

•

Support Cisco QuantumFlow Processor (QFP) forwarding engines.

•

Support QFP provisioned with two TCAM4 devices for ACL lookup and other software features.

•

Perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3
forwarding, quality-of-service (QoS) classification, policing and shaping, security access control lists
(ACLs), VPNs, load balancing, NetFlow.

•

Are responsible for features such as firewalls, intrusion prevention, Network Based Application
Recognition (NBAR), Network Address Translation (NAT), and flexible pattern matching.

•

Incorporates a security encryption coprocessor to assist encryption processing common to all embedded
services processors. The security processor operates in coprocessor mode and only processes packets
sent to it by the Cisco QFP.

Cisco ASR 1000 Series Router Hardware Installation Guide

87

«
...
119
120
121
122
123
...
»

Summary of Contents for ASR 1001































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 1001

Brand: N-Tron Pages: 101

Brand: Paradyne Pages: 22

Brand: Fortinet Pages: 20

Magic WiFi mini Ek

Brand: Devolo Pages: 22

Brand: ZyXEL Communications Pages: 299

Brand: Ravpower Pages: 27

Brand: Galaxy Pages: 30

Brand: BEC Pages: 159

Brand: Aviosys Pages: 77

Brand: ExtraHop Pages: 2

i.LON SmartServer

Brand: Echelon Pages: 34

Brand: Planet Pages: 13

Brand: TRENDnet Pages: 205

dLAN 200 AVsmart+

Brand: Devolo Pages: 2

Brand: Billion Pages: 158

Brand: SMC Sierra Monitor Pages: 43

Brand: Ultra Pages: 4

Brand: Patton electronics Pages: 93

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands