Cisco ASR 1001, Hardware Installation Manual

Page: 136 / 702

• Cisco ASR 1000-SIP40 — This SIP supports:
◦ 4 half height (¼ Rate or full rate or combination) SPAs with up to 24 ports per SPA
◦ 2 full height (¼ Rate or full rate or combination) SPAs with up to 48 ports per SPA
◦ 2 half height and 1 full height combination that does not exceed 96 ports
◦ Up to 40 Gbps aggregate bandwidth from the four SPA bays
◦ ESI bandwidth of 11 to 46 Gbps
◦ Ingress buffering at 128 MB and egress buffering at 6MB
For information about what hardware is supported and compatible and not compatible with the new ASR
1000 40G components and Cisco ASR 1013 Router, see
Table 2-4 and Table 2-3 .
The Cisco SPAs provide the physical interfaces for router connectivity ranging from copper, channelized,
POS, ATM and Ethernet. The Cisco ASR 1000 Series SIP provides the physical termination for the SPAs
and accepts up to four half-height and 2 full height Cisco SPAs.
The is a list of characteristics of the Cisco ASR 1000 Series SPA Interface Processors for the Cisco ASR
1006, Cisco ASR 1004, and Cisco ASR 1013 routers:
• A SIP is a carrier card that inserts into a router slot like a line card. It provides no network connectivity
on its own.
• A SIP contains one or more subslots, which are used to house one or more SPAs. The SPA provides
interface ports for network connectivity.
• During normal operation, the SIP should reside in the router fully populated either with functional SPAs
in all subslots, or with a blank filler plate (SPA-BLANK=) inserted in all empty subslots.
• SIPs support online insertion and removal (OIR) with SPAs inserted in their subslots. SPAs also support
OIR and can be inserted or removed independently from the SIP.
Fully populate all slots and subslots with blank filler plates or functional SPAs for maximum efficiency
of the cooling system. Note
This section describes the Cisco ASR 1000 Series SPA Interface (SIP) components and subslot
identification.
Figure 4-1 shows an example of the Cisco ASR 1000 Series SPA Interface (SIP) module.
STATUS Led 4 SPA subslot 0 1
PWR Led 5 SPA subslot 1 2
Cisco ASR 1000 Series Router Hardware Installation Guide
102
Cisco ASR 1000 Series Router SPA Interface Processors (SIPs)
Cisco ASR 1000 Series SPA Interface Processor