Christie CP2000-X, User Manual

Page: 113 / 164

Section 6
Maintenance
CP2000-X User Manual
6-1
020-100031-01 Rev . 1 (03-2009)
This projector is designed for safe and reliable operation. However safe operation is
not assured by design alone; installers, service technicians, trained operators and all
other users must maintain a safe environment
at all times . Please read through and
understand all warnings and precautions before attempting to operate the projector.
Observe and follow any warnings and instructions marked on the projector.
The exclamation point within the equilateral triangle indicates related
operating/maintenance instructions in the documentation accompanying
the projector.
The lightning flash and arrowhead symbol within the equilateral
triangle indicates non-insulated "dangerous voltage" within the
projector's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
Be aware of the following general precautions in all installations:
WARNING
Never look directly into the projector lens or at the lamp. The
extremely high brightness can cause permanent eye damage.
WARNING
For protection from ultraviolet radiation,
keep all projector housings intact during operation.
Protective clothing and safety goggles are recommended.
NOTES: 1)
The American Conference of Governmental Industrial Hygienists
(ACGIH) recommends occupational UV exposure for an 8-hour day to be less than
0.1 microwatts per square centimeters of effective UV radiation. An evaluation of
your workplace is advised to assure employees are not exposed to cumulative
radiation levels exceeding the government guidelines for your area.
2)
Be aware that
some medications are known to increase one’s sensitivity to UV radiation.
WARNING
FIRE HAZARD. Keep hands, clothes, and all combustible
material at least 1m away from the concentrated light beam of
the lamp.
6.1 Warnings and
Guidelines
Labels and Markings

General Precautions
