Christie CP2000-X, User Manual

Page: 111 / 164

NON-CINEMA OPERATION
CP2000-X User Manual
5-3
020-100031-01 Rev . 1 (03-2009)
Cine-IPM 2K enables 10-bit output and displays. Consult the Cine-IPM 2K User’s Manual
for details.
For any display, the projector interprets incoming signal data according to one of 32
user-selectable
display files defined at the time of installation (and/or with each
subsequent release of a new digital cinema feature) and stored in projector memory.
Each file is essentially a collection of processing/display settings optimized for a
particular cinema feature or alternative non-cinema content, enabling consistent
presentations with minimum further adjustment. Each file is represented by an
assigned “channel button” selectable over several pages of the TPC
Main menu.
Depending on your installation, you may have 0-32 different non-cinema sources
defined for use.
TO SELECT A NON-CINEMA SOURCE
: With a non-cinema source connected to the
CP2000-X , use the Main menu on the Touch Panel Controller to select the channel
button representing the desired non-cinema source. Once selected, the button will
darken and the projected display will change according to the corresponding file
settings. See
3.5, Using the Touch Panel Controller if you need help .
TO RETURN TO A CINEMA SOURCE
, at the Main menu of the Touch Panel Controller ,
select one of the cinema channel buttons pre-configured for a cinema source input at
port
A
or
B
—the CP2000-X will now ignore the DVI ports and respond to the
cinema source activated by this button.
5.2 Selecting the
Source
Controller
Tou
ch Panel