Christie CP2000-X, User Manual

Page: 103 / 164

Section 4
Cinema Operation
CP2000-X User Manual
4-1
020-100031-01 Rev . 1 (03-2009)
This section explains how trained operators can use the projector for presenting cinema events such as movie releases
stored on a digital media storage device. Please read through these pages before displaying cinema for the first time. A
good understanding of all cinema functions and how to access them will help you to run an event smoothly and easily.
NOTE: Before attempting cinema use, the projector must be properly installed, aligned and configured by a qualified
service technician as described in Section 2, Installation and Setup . Refer to Section 3, Basic Operation also.
Make sure HD-SDI
from a digital media
storage device or cinema
server is connected to
one of the
A
or
B
input
ports at the rear of the
CP2000-X projection
head—see right.
The identical
A
or
B
cinema ports use the
SMPTE 292M bit-serial
interface standard, and
will auto-detect cinema
source formats shown in
Table 4.1.
4.1 Compatible
Cinema
Sources
Figure 4.1. Cinema Source Connections