background image

Überspannungsbegrenzer

Surge Suppressors

 3TX7402-3.

Betriebsanleitung

Deutsch

NEB524476510000/RS-AA/002

Last update: 04 April 2022

3ZX1012-0TX02-1AA1

Operating Instructions

English

Montierter Überspannungsbegrenzer,  siehe 

Bild 1

, für Schütze 3TF40 ... 45, 3TF3, 3TH3, 3TH4 

und 3TC44 zur Vermeidung von Störspannungen, die durch Schützspulen erzeugt werden.

Bauform: speziell geeignet für den Anbau an die Spulenklemme.

Einsatzbereiche

Freilaufdioden und Diodenkombinationen werden bei Gleichstrombetätigung verwendet - auf die 

richtige Polung ist zu achten. Varistoren und RC-Glieder werden bei Gleich- und Wechselstrom-

betätigung bei Netzfrequenz bis 60 Hz verwendet.

Die Höhe der Spannungsbegrenzung (Schutzpegel) bei Beschaltung der Schützspule mit  

Freilaufdiode, Diodenkombination, Varistor oder RC-Glied wird durch die Dimensionierung der 

Bauelemente bestimmt.

-  Durch Diodenbeschaltung lassen sich Überspannungen völlig vermeiden 

(Verlängerung des Ausschaltverzuges).

-  Durch Varistoren wird die maximale Höhe der Überspannung begrenzt.

-  Durch RC-Glieder verringert sich die Steilheit des Spannungsanstieges

Montage

Maßbilder siehe 

Bild 2

a

 Gehäuseform A

b

 Gehäuseform B

Schaltbilder siehe 

Bild 3

Betrieb

Schutz vor Überlastung

Fremde Überspannungen, die z.B. durch Schalten induktiver oder kapazitiver Lasten an den 

Überspannungsbegrenzern auftreten können, müssen durch Beschaltungsmaßnahmen in der 

Anlage auf einen unkritischen Wert (Schutzpegel muss niedriger sein als der des Über-

spannungsbegrenzers) reduziert werden.

Die Frequenzabhängigkeit  der RC-Glieder ist zu berücksichtigen. Bei höheren Netzfrequenzen 

und in Netzen mit einem hohen Überschwingungsanteil können die RC-Glieder thermisch über-

lastet werden.

Technische Daten

siehe Tabelle

(1) Bestell-Nr.

(2) Begrenzertyp; Gehäuseform A oder B

(3) Nennbetätigungsspannung der Schützspule Us

(4) Schutzpegel

(5) Maximal zulässige Betriebsspannung der Bauelemente

(6) Verlängerung des Ausverzugs der beschalteten Schütze

(7) Spitzensperrspannung für Dioden bzw. Diodenkombinationen 

Typen bei Varistoren

R- und C-Werte bei RC-Gliedern

Zulässige Umgebungstemperatur:

-25 °C ... +55 °C

Bemessungsisolationsspannung:

U

i

= 690 V

Verschmutzungsgrad

3

Höchstzulässige Dauerbelastbarkeit wird bei der zulässigen Schalthäufigkeit der Schützspule 

nicht überschritten.

Vor der Installation, dem Betrieb oder der Wartung des Geräts muss diese Anleitung 

gelesen und verstanden werden. 

 GEFAHR

Gefährliche Spannung.

Lebensgefahr oder schwere Verletzungsgefahr.

Vor Beginn der Arbeiten Anlage und Gerätespannung frei 

schalten.

VORSICHT

Eine sichere Gerätefunktion ist nur mit zertifizierten Komponenten gewährleistet! 

!

Fitted surge suppressors, see 

Fig. 1

, for contactors 3TF40 to 45, 3TF3, 3TH3, 3TH4 and 3TC44

for avoiding interference voltages produced by contactor coils. Design: Specially suitable for 

attachment to coil terminal.

Applications

Freewheeling diodes and diode combinations are used for DC actuation (pay attention to correct 

polarity). Varistors and RC elements are used for DC and AC actuation at system frequency 

levels up to 60 Hz.

The extent of surge suppression (protection level) with the contactor coil protectively connected 

up with freewheeling diode, diode combination, varistor or RC element depends on how the 

components are dimensioned. 

- With diode connection, surges can be completely avoided (prolongation of opening delay).

- Varistors limit the maximum surge level.

- RC elements limit the rate of voltage rise

Installation

Dimension drawings see 

Fig. 2

a

 Housing form A

b

 Housing form B

Circuit diagrams see 

Fig. 3

Operation

Overload protection

Interference voltage surges, which can occur at the suppressors for example when inductive or 

capacitive loads are switched, must be reduced to a non-critical value by way of protective 

circuitry in the system. (The protective level must be lower than that of the surge suppressor.)

The frequency dependence of the RC elements must be taken into account. At higher system 

frequencies and in systems with high harmonic content, the RC elements may be subjected to 

thermal overload.

Technical data

see Table

(1) Order no.

(2) Suppressor type; housing form A or B

(3) Rated control voltage of contactor coil Us

(4) Protection level

(5) Maximum permissible operating voltage of components

(6) Prolongation of OFF delay of contactors with protective circuit

(7) Peak reverse voltage for diodes/diode combinations

Types with varistors

R and C values with RC elements

Permissible ambient temperature: 

-25 °C to +55 °C

Rated insulation voltage 

U

i

= 690 V

Pollution degree 

3

Maximum permissible  limiting  continuous withstand value is not exceeded when the contactor 

coil is switched with permissible frequency.

Read and understand these instructions before installing, operating, or 

maintaining the equipment.

 

 DANGER

Hazardous voltage.

Will cause death or serious injury.

Disconnect power before working on equipment.

CAUTION

Reliable functioning of the equipment is only ensured with certified 

components.

!

(1)

(2)

(3)

(4)

(5)

(6)

(7)

AC V

DC V

AC V

DC V

AC V

DC V

3TX7402-3A 
3TX7402-3D 
3TX7402-3E 

3TX7402-3G 
3TX7402-3H 

3TX7402-3J 

3TX7402-3K 

3TX7402-3L 

3TX7402-3R 
3TX7402-3S 

3TX7402-3T 

3TX7402-3U 
3TX7402-3V

Diode/Diode; A 

Diodenkombination/Diode combination; A 

Suppressordiode/Suppressor diode; A 

Varistor/Varistor; A 
Varistor/Varistor; A 
Varistor/Varistor; A 
Varistor/Varistor; B 
Varistor/Varistor; B 

RC-Glied/RC element; B 
RC-Glied/RC element; B 
RC-Glied/RC element; B 
RC-Glied/RC element; B 
RC-Glied/RC element; B

— 
— 
— 

24...48 

48...127 

127...240 
240...400 
400...600 

24...48 

48...127 

127...240 
240...400 
400...600

24...250 
24...250 

24 

24...70 

70...150 

150...250 

— 
— 

24...70

70...150

150...250

— 
— 

13 

— 

150 
350 
650 

1050 
1500 

150 
170 
350 

1200 
2000

13 
36 

150 
350 
650 

— 
— 

200 
280 
400 

— 
— 

— 
— 
— 

53 

140 
265 
440 
660 

53 

140 
265 
440 
660 

275 
275 

36 
77 

165 
275 

— 
— 

77 

165 
275 

— 
— 

Faktor/Factor 6...9 
Faktor/Factor 3...6 

Faktor/Factor 2 

2...5 ms 
2...5 ms 
2...5 ms 
2...5 ms 
2...5 ms 

vernachlässigbar/negligible 
vernachlässigbar/negligible 
vernachlässigbar/negligible 
vernachlässigbar/negligible 
vernachlässigbar/negligible 

4000 V 
4000 V 

36 V 

SIOV S07 K60 

SIOV S07 K150 
SIOV S07 K300 
SIOV S07 K460 
SIOV S07 K680 

68

Ω

 2,2

μ

220

Ω

 0,68

μ

F

1 k

Ω

 0,15

μ

3,3 k

Ω

 0,033

μ

6,8 k

Ω

 0,01

μ

F

Summary of Contents for 3TX7402-3A






Reviews: