Fig. 71: View Of Engine Block Rear Oil Gallery Plug
Courtesy of GENERAL MOTORS CORP.
1. Inspect the rear oil gallery plug for proper installation.
IMPORTANT:
z
Do not use the crankshaft rear oil seal or the engine rear cover
gasket again.
z
Do not apply any type sealant to the rear cover gasket, unless
specified.
z
The special tools in this procedure are used to properly align the
engine rear cover at the oil pan surface and to center the crankshaft
rear oil seal.
z
The crankshaft rear oil seal will be installed after the rear cover has
been installed and aligned. Install the rear cover without the
crankshaft oil seal.
{
The crankshaft rear oil seal MUST be centered in relation to the
crankshaft.
{
The oil pan sealing surface at the rear cover and engine block
MUST be aligned within specifications.
{
An improperly aligned rear cover may cause premature rear oil
seal wear and/or engine assembly oil leaks.
2004 Chevrolet Corvette
2004 ENGINE PERFORMANCE Engine Mechanical (Repair Instructions 3 Of 3) - 5.7L - Corvette
Helpmelearn
December-24-07 11:06:37 AM
Page 79
© 2005 Mitchell Repair Information Company, LLC.
