Canon iR5055, Service Manual

Page: 83 / 646

Chapter 2
2-21
1) Open the front cover.
2) Turn the fixing/feeding assembly release lever [1] in the direction of the
arrow to release the transfer/separation charging unit. Slide the fixing/
feeding assembly [2] out.
F-2-77
3) Remove the delivery roller guide [1].
- 2 screws [2]
F-2-78
4) Attach the delivery roll.
- Attach the delivery roll [1] to the position of the pin [3] found in the
center of the delivery roller shaft [2].
- Fit the protrusion [4] of one delivery roll to the mounting hole [5] of the
other delivery roll.
- Fit E-ring [6] to the groove on the delivery roller shaft to mount.
F-2-79
5) Mount the delivery roller guide.
6) Slide the fixing/feeding assembly in the machine and close the front cover.
7) Detach the left cover (upper) [1].
- 2 screws [2]
F-2-80
8) Attach the magnet plate [1] to the left cover (upper) and bend the claws
[2] at the both ends in the direction of the arrow.
F-2-81
9) Attach the left cover (upper).
10) Fit the protruding parts [1] at the delivery tray end to the mounting holes
[2] on the host machine.
- When mounting the delivery Tray to the host machine, be sure to attach the
rollers in the center of delivery roller.
- When mounting the delivery tray to the host machine, shift tray or finisher
should not be mounted.
[1] [2]
[2] [1]
[2]
[1]
[2]
[3]
[4]
[6]
[5]
See the figure below to make sure the mounting direction of the delivery
roller's protrusion [1].
[1]
[1]
[1] [2] [1]
[1]
[2]