Canon iR5055, Service Manual

Page: 581 / 646

Chapter 17
17-49
PH-D-SEL Select the number of lines for printing in photo mode.
0: 141 lines (default)
1: 134 lines
2
OP-SZ-DT Use it to enable/disable original size detection for book mode.
setting
0: off (require input of size on control panel; default)
1: on (use auto original size detection)
2
NW-SCAN Use it to permit/not permit the network scan function.
setting
0: do to permit network scan function (default)
1: permit network scan function
Caution:
For the Japanese model, the value cannot be changed.
For a non-Japanese model, PSPCL is fixed to '1'; the value may be changed on other models.
2
HDCR-DSP Use it to set how HDD full deletion mode may operate.
1: using 0s, delete once (default)
2: using random data, delete once
3: using random data, delete 3 times
2
JOB-INVL Use it to set the interval of jobs for an interrupt.
setting
0: standard (at time of interrupt copy, continuously output next jobs; default)
1: output next job only after delivering last sheet of interrupt copy
2: output next job only after delivering last sheet of all jobs
2
PCL-COPY Use it to set PCL command COPIES Meru/Pintubo/Hood compatibility.
0: use page-based control according to COPIES command value specified for each page (default)
1: Meru/Pinatubo/Hood compatibility mode
2 to 6535: reserved
2
PRJOB-CP Use it to set the CCV count pulse generation for reception and report output.
setting
0: do not generate count pulse (default)
1: generate count pulse
2
DPT-ID-7 Use it to select the 7-character input method for group ID registration and authentication.
setting
0: normal (default)
1: use 7-character input
2
RUI-RJT Use it to enable/disable connection of the HTTP port at 3 failed attempts at authentication by the RUI.
setting
0: make invalid (default)
1: keep valid
2
CTM-S06 Use it to specify whether a password should be removed from the export file (file transmission address).
setting
0: do not remove password from export file (default)
1: remove password from export file
2
FREG-SW Use it to enable/disable display of the free area of the MEAP counter (SEND).
setting
0: do not display (default)
1: display
2
IFAX-SZL Use it to limit transmission size for i-fax transmission.
setting
0: keep transmission size limit valid (using server/not using server)
1: keep transmission size limit invalid (only when not using server; default)
2
IFAX-PGD Use it o enable/disable page-based division transmission (only when the transmission data size upper limit is exceeded).
setting
0: do not permit page-based division transmission in i-fax simple mode (default)
1: enable page-based division transmission in i-fax simple mode
2
MEAPSAFE Use it to enable/disable switchover to safe mode for MEAP.
0: off (default)
1: on (safe mode)
2
AFN-PSWD Use it to limit access to user mode.
setting
0: off (shift to user mode screen without prompting for password; default)
1: on (shift to user mode after password match)
2
PTJAM-RC Use it to enable/disable PDL jam recovery.
setting
0: off (disable recovery)
1: on (enable recovery; default)
2
COPIER > OPTION >USER
Sub-item Description Level