Canon iR5055, Service Manual

Page: 591 / 646

Chapter 17
17-59
<INT-FACE>
T-17-56
<TEMPO>
MIN-PRC Coin manager minimum value setting
This determines the minimum value handled by the coin manager which is connected. For instance, the service technician inputs
"10" if the minimum value supported by the Japanese yen coin manager is 10 yen.
This item takes effect only when 4 is set for ACC>COIN.
Additional note
When a number from 1 to 4 (Euros, pounds, Swiss francs, dollars) is set for COPIER>OPTION>ACC>UNIT-PRC, a fractional
monetary unit can be input. For instance, an input of "50" signifies 50 cents ($0.50).
Setting range: 0 to 9999
[Factory setting/value after clearing RAM: 10]
Only supports iR5075/5065/5055 Series V2. (BODY No. CHL XXXX, CHM XXXX, CHN XXXX, CHP XXXX, CHQ XXXX,
CHU XXXX, CHV XXXX, CHW XXXX, CHZ XXXX, CJA XXXX, CJD XXXX, CJJ XXXX, CJK XXXX, CJP XXXX, CJQ
XXXX, CJR XXXX, CJU XXXX, CJZ XXXX, CKA XXXX, CKC XXXX, CKD XXXX, CKE XXXX)
1
MAX-PRC Coin manager maximum value setting
This determines the maximum value handled by the coin manager which is connected. An error screen is displayed if a value lower
than the smallest unit is input when inputting the charge amount using initial settings/registration. For instance, the service
technician inputs "8900" if the maximum value supported by the Japanese yen coin manager is 8900 yen.
This item takes effect only when 4 is set for ACC>COIN.
Additional note
When a number from 1 to 4 (Euros, pounds, Swiss francs, dollars) is set for COPIER>OPTION>ACC>UNIT-PRC, a fractional
monetary unit can be input. For instance, an input of "50" signifies 50 cents ($0.50).
Setting range: 0 to 9999
[Factory setting/value after clearing RAM: 0]
Only supports iR5075/5065/5055 Series V2. (BODY No. CHL XXXX, CHM XXXX, CHN XXXX, CHP XXXX, CHQ XXXX,
CHU XXXX, CHV XXXX, CHW XXXX, CHZ XXXX, CJA XXXX, CJD XXXX, CJJ XXXX, CJK XXXX, CJP XXXX, CJQ
XXXX, CJR XXXX, CJU XXXX, CJZ XXXX, CKA XXXX, CKC XXXX, CKD XXXX, CKE XXXX)
1
CC-SPSW Use it to set control card I/F support.
0: do not support (default)
1: support
2
UNIT-PRC Unit price setting for coin vendors
Sets unit price for coin vendors.
Setting values
0: Yen
1: Euro
2: Pound
3: Swiss Franc
4: Dollar
5: No unit, no fractional unit.
6: No unit, with fractional unit.
[Factory settings and after RAM clear: 0]
Only supports iR5075/5065/5055 Series V2. (BODY No. CHL XXXX, CHM XXXX, CHN XXXX, CHP XXXX, CHQ XXXX,
CHU XXXX, CHV XXXX, CHW XXXX, CHZ XXXX, CJA XXXX, CJD XXXX, CJJ XXXX, CJK XXXX, CJP XXXX, CJQ
XXXX, CJR XXXX, CJU XXXX, CJZ XXXX, CKA XXXX, CKC XXXX, CKD XXXX, CKE XXXX)
2
COPIER > OPTION > INT-FACE
Sub-item Description Level
IMG-CONT Use it to set the connection of the EFI controller.
setting
0: no controller
1: EFI model (PINATUBO, Mt. Hood)
2: T/R, AHT model
3: EFI external controller present (Yukon/Pinatubo V2.0)
4: EFI external controller present (Meru V3.1)
1
AP-OPT Use it to permit/not permit printing from application PrintMe built into the PS print server unit.
setting
0: permit printing using unspecific ID (default)
1: permit printing using specific account
2: reject printing
2
AP-ACCNT Use it to set (CPCA) group ID for printing (job) from application PrintMe built into the PS print server unit.
setting
0 to 9999999 (default: 0)
2
AP-CODE Use it to set the (CPCA) path for printing (job) from application PrintMe built into the PS print server unit.
setting
0 to 99999999 (default: 0)
2
COPIER > OPTION > ACC
Sub-item Description Level