Canon iR5055, Service Manual

Page: 541 / 646

Chapter 17
17-9
5: side paper deck
6: manual feed tray
7: duplexing assembly
<CNTR> indicates the reading of the soft counter used for the source of paper.
<SIZE> indicates the size of paper.
<ERR>
F-17-10
<No.> indicates how recent the error in question is.
1 to 50 (the higher the number, the older the error)
<DATE> indicates the date of occurrence of the error in question.
<TIME1> indicates the time of occurrence of the error in question.
<TIME2> indicates he error recovery time.
<CODE> indicates the error code in question.
<DTL> indicates the detail code of the error in question. (if none, '0000')
<L> indicates the location of the error in question.
0: main controller
1: DADF
2: finisher
3: not used
4: reader unit
5: printer unit
6: PDL board
7: fax board
<P> not used
<HV-STS>
T-17-5
<CCD>
T-17-6
<DPOT>
T-17-7
COPIER > DISPLAY > HV-STS
Sub-item Description Level
PRIMARY primary charging current; in uA 1
PRE-TR pre-transfer (post) current; in uA 1
TR transfer current (1st side); in uA 1
SP separation current (1st side); in uA 1
BIAS developing bias output value DC component; in V 1
SP-N2 separation current (2nd side); in uA 1
TR-N2 transfer current (2nd side); in uA 1
COPIER > DISPLAY > CCD
Sub-item Description Level
TARGET-G indicates the shading target value of green. 2
GAIN-OG indicates the gain level adjustment value of green for CCD odd-numbered bits. 2
GAIN-EG indicates the gain level adjustment value of green for CCD even-numbered bits. 2
GAIN-OR indicates the gain level adjustment value of red for CCD odd-numbered bits.
2
GAIN-ER indicates the gain level adjustment value of red for CCD even-numbered bits.
2
COPIER > DISPLAY > DPOT
Sub-item Description Level
DPOT-K COPIER>FUNCTION>DPC>OFST
potential reflecting the value after execution; in V
1
VL1T light-area potential target value; in V 1
VL1M light-area potential measurement value; in V 1
VL2M light-area potential measurement value for developing bias; in V 1
VDT dark-area potential target value; in V 1