Canon iR5055, Service Manual

Page: 599 / 646

Chapter 17
17-67
<DRBL-2>
T-17-71
FX-WEB Indicates the number of times the fixing web has been taken up.
If you have replaced the web, be sure to reset the reading in service mode: COPIER>COUNTER>MISC>FIX-WEB,
COPIER>COUNTER>DRBL-1>FX-WEB.
1
DLV-UCLW delivery upper separation claw counter 1
DLV-LCLW delivery lower separation claw counter 1
COPIER > COUNTER > DRBL-2
Sub-item Description Level
DF-PU-RL Indicates the number of sheets picked up by the ADF pickup roller.
(counter reading retained by the controller PCB)
for both simplex and duplex modes, the count is increased by 1 (regardless of the number of sides); also, there is no distinction
between large and small sizes
1
DF-SP-PL Indicates the number of sheets separated by the ADF separation pad.
setting rage/setting item
00000000 to 99999999
1
DF-SP-PD Indicates the number of sheets separated by the ADF separation pad.
(counter reading retained by the controller PCB)
for both simplex and duplex modes, the count is increase by 1 (regardless of the number of sides); also, there is no distinction
between large and small sizes
1
DF-FD-RL Indicates the number of sheets feeded by the ADF feed roller.
(counter reading retained by the controller PCB)
in the case of simplex mode, the count is increased by 1 for each original read; in the case of duplex mode, the count is increased
by 3 for each original read (to accommodate 3 feeding sessions, i.e., face, back, and idle); there is no distinction between large and
small sizes
1
LNT-TAP1 Indicates the number of sheets moving past the ADF dust-collecting tape.
for both simplex and duplex modes, the count is increased by 1 for each original read (not its sides)
1
LNT-TAP2 Indicates the number of sheets moving past the ADF dust-collecting tape.
for both simplex and duplex modes, the count is increased by 1 for each original read (not its sides)
1
LNT-TAP3 Indicates the number of sheets moving past the ADF dust-collecting tape.
for both simplex and duplex modes, the count is increased by 1 for each original read (not its sides)
1
LNT-TAP4 Indicates the number of sheets moving past the ADF dust-collecting tape.
for both simplex and duplex modes, the count is increased by 1 for each original read (not its sides)
1
LNT-TAP5 Indicates the number of sheets moving past the ADF dust-collecting tape.
for both simplex and duplex modes, the count is increased by 1 for each original read (not its sides)
1
STAMP number of times the stamp solenoid has gone on
1
PD-PU-RL Indicates the number of sheets moving past the paper deck pickup roller.
(counter reading retained by the controller PCB)
1
PD-SP-RL Indicates the number of sheets moving past the paper deck separation roller.
(counter reading retained by the controller PCB)
1
PD-FD-RL Indicates the number of sheets moving past the controller PCB.
(counter reading retained by the controller PCB)
1
SORT Sort counter
The large and small sizes are not distinguished from each other.
1
FIN-STPR stapler (handling tray assembly) 1
SADDLE Saddle paper transport counter
The large and small sizes are not distinguished from each other.
1
SDL-STPL Indicates the number of times the stapler (saddle assembly) has operated.
(counter reading retained by the DC controller PCB)
1
PUNCH Punching counter
1
FIN-BFFRL Indicates the number of times the puncher has swung. 1
COPIER > COUNTER > DRBL-1
Sub-item Description Level