Chapter 17
17-51
Soft Counter Specifications
100s: total
200s: copy (as needed, add 001 and up)
300s: print
400s: copy + print
500s: scan
600s: box print
700s: reception print
800s: report print
900s: transmission
<Guide to Symbols>
Yes: counter used in the machine.
large size: paper larger than B4.
small size: paper that is B4 or smaller.
numbers 1 and 2 under Description indicate the count for large size paper.
(The machine may be set so that it will count B4 and larger paper as a large size paper in service mode: COPIER>OPTION>USER>B4-L-CNT).
total A: total excluding local copy + remote copy.
total B: total excluding local copy + remote copy + box print.
copy: local copy + remote copy.
copy A: local copy + remote copy + box print.
print: PDL print + report print + box print.
print A: PDL print + report print.
scan: black-and-white scan + color scan
T-17-53
SNMP-COA
SNMP access restriction switch for internal community name (administrative privilege)
Restrict the SNMP access regarding the internally obtained community name (administrative privilege).
Setting range
0: OFF
1: ON (Read only)
2: ON (Read/Write available) [default]
Usually the SNMP community name can be set using the following item; [Additional Functions]>[System Settings]>[Network
Settings]>[SNMP Settings]. There is an internal community name (administrative privilege) in addition to the community name
that is set in the above item, and it is used at the time of access using the Canon utility software such as NetSpot.
In the case that the SNMP access using an internal community name needs to be restricted in view of security, set this item to '0' or
'1'.
Only supports iR5075/5065/5055 Series V2. (BODY No. CHL XXXX, CHM XXXX, CHN XXXX, CHP XXXX, CHQ XXXX,
CHU XXXX, CHV XXXX, CHW XXXX, CHZ XXXX, CJA XXXX, CJD XXXX, CJJ XXXX, CJK XXXX, CJP XXXX, CJQ
XXXX, CJR XXXX, CJU XXXX, CJZ XXXX, CKA XXXX, CKC XXXX, CKD XXXX, CKE XXXX)
2
SNMP-COU
SNMP access restriction switch for internal community name (user privilege)
Restrict the SNMP access regarding the internally obtained community name (user privilege).
Setting range
0: OFF
1: ON (Read only)
2: ON (Read/Write available) [default]
Usually the SNMP community name can be set using the following item; [Additional Functions]>[System Settings]>[Network
Settings]>[SNMP Settings]. There is an internal community name (user privilege) in addition to the community name that is set in
the above item, and it is used at the time of access using the Canon utility software such as NetSpot.
In the case that the SNMP access using an internal community name needs to be restricted in view of security, set this item to '0' or
'1'.
Only supports iR5075/5065/5055 Series V2. (BODY No. CHL XXXX, CHM XXXX, CHN XXXX, CHP XXXX, CHQ XXXX,
CHU XXXX, CHV XXXX, CHW XXXX, CHZ XXXX, CJA XXXX, CJD XXXX, CJJ XXXX, CJK XXXX, CJP XXXX, CJQ
XXXX, CJR XXXX, CJU XXXX, CJZ XXXX, CKA XXXX, CKC XXXX, CKD XXXX, CKE XXXX)
2
COPIER > COUNTER
No.
Description
Level
101
total 1
Yes
102
total 2
Yes
103
total (large)
Yes
104
total (small)
Yes
105
total (full color 1)
106
total (full color 2)
108
total (black-and-white 1)
Yes
109
total (black-and-white 2)
Yes
110
total (mono color; large)
111
total (mono color; small)
112
total (back-and-white; large)
Yes
113
total (black-and-white; small)
Yes
114
total 1 (duplex)
Yes
115
total 2 (duplex)
Yes
116
large (duplex)
Yes
117
small (duplex)
Yes
118
total (mono color 1)
119
total (mono color 2)
120
total (full color; large)
121
total (full color; small)
COPIER > OPTION >USER
Sub-item
Description
Level
Summary of Contents for iR5055
