Printing procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
•
Before printing banners or other long documents, spread a clean cloth or paper on the oor. Otherwise
use the optional Output Stacker.
Otherwise, long sheets that touch the oor after printing may become dirty.
•
If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and cut the paper manually. (→P.124)
1.
Turn the printer on. (→P.22)
2.
Select a roll as the paper source. (→P.104)
3.
Set a roll on the Roll Holder. (→P.107)
Basic Printing Workow 77
