Handling rolls
Detection of the Remaining Roll Paper
If you have activated automatic detection of the remaining roll paper, when the roll is ejected, a barcode with text is
printed on the roll paper that identies the type of paper and amount left. If this function is activated and barcodes
are printed on the roll paper, the type of paper and amount left are automatically detected when you load a
roll. The barcode will be cut off after it has been read.
Note
•
If the document is not cut but kept in the printer, only the text message is printed. This is also the
case when printing on 8-inch rolls or clear lm.
Important
•
If the barcode is not detected when it is advanced, enter the type and length of paper on the Control
Panel.
•
Barcodes are not cut off when
Chk Remain.Roll
and
Trim Edge First
are both
Off
. To have the printer
cut off barcodes automatically, on the Control Panel menu, set
Chk Remain.Roll
to
On
. Otherwise cut
off barcodes by using
Paper Cutting
in the Control Panel menu.
Follow these steps to activate detection of the remaining roll paper.
1.
Press the
Menu
button to display
MAIN MENU
.
2.
Press
▲
or
▼
to select
Media Menu
, and then press the
►
button.
3.
Press
▲
or
▼
to select
Chk Remain.Roll
, and then press the
►
button.
4.
Press
▲
or
▼
to select the desired setting option, and then press the
OK
button.
120 Handling Paper
