Messages regarding printing or adjusment
Messages regarding printing or adjusment
Use another paper.
Cause
Corrective Action
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.542)
The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Adjust the feed amount manually.
(→P.552)
Cannot print as specied.
Lift the release lever and replace paper with A4/LTR (vertical) or larger
Cause
Corrective Action
The loaded paper is too small.
Switch to paper A4/Letter (vertical) or larger.
Lift the release lever and replace roll with 10 in. wide or larger roll
Cause
Corrective Action
The loaded paper is too small.
Load a roll 10 inches wide or larger.
Cannot adjust band.
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.567)
2.
Clean the Printhead if the nozzles are clogged.
(→P.568)
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
Adjust the feed amount manually.
(→P.552)
Cannot adjust printhead.
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.567)
2.
Clean the Printhead if the nozzles are clogged.
(→P.568)
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.542)
640 Error Message
