Frequently Asked Questions
Troubleshooting
Frequently Asked Questions
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the
hyperlinks in the answer column.
Question
Answer
How do I print on a roll?
When printing on rolls, after loading the roll, specify the paper type and
length, both on the Control Panel and in the printer driver.
Þ
Loading and Printing on Rolls (→P.77)
How do I print manually?
When printing manually, specify the paper type and size in the printer
driver, and then load the paper.
Þ
Loading and Printing on Sheets (→P.81)
How do I switch between
printing on a roll and printing
manually?
Press the
Feeder Selection
button to switch the paper source between
the roll and a sheet.
Þ
Selecting the Paper Source (→P.104)
How do I change the paper type
or size?
Specify the type and size of paper, both on the Control Panel and in the
printer driver.
•
Specifying it in the Printer Driver
Þ
Specifying Paper in the Printer Driver (→P.204)
•
Specifying it on the Control Panel
Selecting the paper type
Þ
Selecting the Paper Type (Roll) (→P.105)
Þ
Selecting the Paper Type (Sheet) (→P.134)
Selecting the Paper Size
Þ
Specifying the Paper Length (Roll) (→P.106)
How do I cut the roll paper after
printing?
You can wait until ink dries before cutting the roll, and you can cut rolls
at a desired position.
Þ
Specifying the Cutting Method for Rolls (→P.124)
How do I print without borders?
Borderless printing is possible on rolls. You can also specify borderless
printing in the printer driver by adjusting the original size to match the
paper size.
Borderless printing is not supported on sheets.
Þ
Borderless Printing on Paper of Equivalent Size (→P.263)
Þ
Borderless Printing by Resizing Originals to Fit the Roll Width (→P.273)
Þ
Borderless Printing at Actual Size (→P.253)
How do I print an A4 original
enlarged on A2 paper?
In the printer driver, you can adjust the original image to match the paper
size or width, or you can specify enlargement or reduction before printing
as desired.
Þ
Resizing Originals to Match the Paper Size (→P.211)
Þ
Resizing Originals to Fit the Roll Width (→P.220)
Þ
Resizing Originals by Entering a Scaling Value (→P.229)
Troubleshooting 599
