Network Setting
Initializing the Network Settings
Use RemoteUI to restore the network settings to the default values as follows.
Important
•
Initializing the network settings will also restore the default value of the printer’s IP address. As a result,
the RemoteUI page cannot be displayed in the web browser after this procedure.
•
For instructions on reconguring the IP address, see “Conguring the IP Address on the Printer”.
(→P.503)
•
For details on RemoteUI, see “Using RemoteUI”. (→P.507)
1.
Start the web browser and enter the following URL in the
Location
(or
Address
) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
Select
Administrator Mode
and click
Logon
.
3.
If a password has been set on the printer, enter the password.
4.
Click
Network
in the
Device Manager
menu at left to display the
Network
page.
5.
Click
Reset to Default settings
in the lower-right corner of the
Network Interface
group.
6.
After conrming the message, click
OK
to restore the network settings to the default values.
Note
•
You can also use imagePROGRAF Device Setup Utility or the Control Panel to restore the default
network settings.
•
If you use the Control Panel to initialize the network settings, press the
Menu
button to display
MAIN
MENU
, and then press
▲
,
▼
, and
►
to select
Interface Setup
→
Ethernet Driver
→
Init. Settings
→
Yes
(in this order), and nally press the
OK
button.
516 Network Setting
