Canon imageRUNNER ADVANCE C5500 Series, Service Manual, Page: 927 / 1331

COPIER > OPTION > FNC-SW
BXSHIFT 1 Setting of binding at 0mm binding margin
Detail To set whether to judge the job as a job "without binding" when storing a PDL job in Inbox while
the binding margin is set to "0".
By setting the binding margin to 0 mm while "0" is set, the job is processed as "without binding".
"Booklet" in "Options" on the Inbox screen can be also used.
When "1" is set, it is judged as "with binding" even the binding margin is 0 mm so "Booklet", which
has an exclusive relationship with "binding", cannot be used.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When storing a PDL job in Inbox while 1 is set, "Booklet" in "Options" on the Inbox screen cannot
be used.
Display/Adj/Set Range 0 to 1
0: Without binding, 1: With binding
Default Value 0
SELF-CHK 2 For R&D
HOME-SW 1 Set screen displayed with Main Menu key
Detail To set whether to display the main menu screen or the screen registered as the startup screen
when pressing Main Menu key.
Use Case Upon user's request (to change the startup screen)
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: Main Menu screen, 1: Screen registered as the startup screen
Default Value 0
NO-LGOUT 1 Display/hide of logout button
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to display or hide [Logout] button.
When 0 is set, [Logout] button is displayed on the screen, and logout with the ID key is enabled.
(Normal)
When 1 is set, [Logout] button is not displayed, and logout with the ID key is disabled.
Use Case
Upon user's request (for customization, etc.)
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 1
0: Display, 1: Hide
Default Value
0
T-DLV-BK 1 Bk Tonr Cont prior dvry alarm notice tmg
Detail To set the toner level as the timing to notify the prior delivery alarm for the Bk-color Toner Container.
Use Case When changing the timing to notify the end of life according to the usage status
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution Since toner level is calculated based on the toner supply count, some errors may occur.
Display/Adj/Set Range 0 to 40
Unit %
Default Value It differs according to the location.
Related Service Mode COPIER> OPTION> FNC-SW> T-DLV-CL
Amount of Change per
Unit
1
8. Service Mode
913