Canon imageRUNNER ADVANCE C5500 Series, Service Manual, Page: 1099 / 1331

SORTER > ADJUST
SDL-FLD2 1 Adj of Saddle Sttch fold pstn: Fin-Y1
Detail To adjust the fold position of Saddle Stitcher (when using the thin paper; the paper that the paper
weight is less than 64 g/m2).
As the value is incremented by 1, the fold position moves by 0.1 mm.
+: The fold position moves toward the left at open page of the book
-: The fold position moves toward the right at open page of the book
Use Case When the fold position of the Saddle Stitcher is displaced with the thin paper
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range -20 to 20
Unit mm
Related Service Mode SORTER> ADJUST> SDL-FLD
Supplement/Memo Perform this adjustment after performing the adjustment of SDL-FLD.
Because the fold position of the thin paper is adjusted by the total setting values of SDL-FLD and
SDL-FLD2, the actual adjustment of the fold position is performed in the fold position adjustable
range (-20 to 20) even if entering the setting value beyond the mechanical fold position adjustable
range.
Amount of Change per
Unit
0.1
ESC1-SPD 1 Adj Escape Tr delivery speed: Fin-Y1
Detail To adjust the delivery speed to the escape tray.
As the value is changed by 1, the delivery speed to the lower escape tray changes by 10 mm/sec.
Use Case When the paper stacking to the escape tray is misalignment
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range -10 to 0
Unit mm/s
Amount of Change per
Unit
10
SFT-SPD 1 Adj dvry speed at collate mode: Fin-Y1
Detail To adjust the delivery speed to the stack tray at collate mode.
As the value is changed by 1, the delivery speed changes by 10 mm/sec.
Use Case
When the paper stacking of stack tray at collate mode is misalignment
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
- When the value is decreased, the productivity is decreased.
- When the buffer operation is performed, delivery speed does not change. (The buffer operation
is the operation to deliver the stacking paper on the processing tray.)
The ON/OFF of buffer operation is set by BUFF-SW.
Display/Adj/Set Range -5 to 5
Unit mm/s
Related Service Mode SORTER> OPTION> BUFF-SW
Amount of Change per
Unit
10
8. Service Mode
1085