Canon imageRUNNER ADVANCE C5500 Series, Service Manual, Page: 1049 / 1331

COPIER > TEST > PG
COLOR-K 1 Setting of Bk-color output at test print
Detail To set whether to output Bk-color at the time of test print.
The setting is applied to all types.
When setting COLOR-K to 1 and COLOR-Y/M/C to 0, a single Bk-color is output.
Use Case At test print
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: Not output, 1: Output
Related Service Mode COPIER> TEST> PG> COLOR-Y/M/C
F/M-SW 1 Setting of PG full color/single color
Detail To set whether to output PG in full color or single color.
Use Case
When identifying the cause whether it's due to full color or single color
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 1
0: Full color, 1: Single color
Default Value
0
PG-PICK 1 Setting of test print paper source
Detail To set the paper source at the time of test print output.
Use Case At problem analysis
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 1 to 8
1: Cassette 1, 2: Cassette 2, 3: Cassette 3, 4: Cassette 4, 5: Multi-purpose Tray, 6: Paper Deck,
7 to 8: Not used
2-SIDE 1 Setting of PG 2-sided mode
Detail To set 1-sided/2-sided print for PG output.
Use Case At problem analysis
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: 1-sided, 1: 2-sided
Default Value
0
PG-QTY 1 Setting of PG output quantity
Detail To set the number of sheets for PG output.
Use Case At problem analysis
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 1 to 999
Unit sheet
Default Value 1
Amount of Change per
Unit
1
8. Service Mode
1035