Canon imageRUNNER ADVANCE C5500 Series, Service Manual, Page: 1024 / 1331

COPIER > OPTION > ACC
HCC-P 1 Setting of Cst3 paper size (CST-FD2)
Detail To set the paper size used in the High Capacity Cassette Pedestal.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Adjust the Guide Plate position.
Display/Adj/Set Range 0 to 1
0: A4, 1: LTR
Default Value It differs according to the location.
CV-CSZ 1 Set outpt info notice:chg w/device alone
Detail To set whether to notify the Coin Manager of color mode and paper size at the time of charging
with a device alone.
Use Case When Coin Manager (CV3) is connected
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
Set 0 when a coin manager other than CV3 is connected. When 1 is set, an error occurs.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
0
IMG-RTRY 1 ON/OFF of img form proc for Coin Manager
Detail To set whether to perform image formation process supporting the connected Coin Manager.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
■ INT-FACE
COPIER > OPTION > INT-FACE
IMG-CONT 1 Connection setting of print server
Detail To set connection with print server.
Use Case At installation
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 4
0: Print server not yet connected (normal), 1, 2: Not used, 3: Print server (color machine)
connected, 4: Print server (B&W machine) connected
Default Value 0
AP-OPT 2 [Not used]
AP-ACCNT 2 [Not used]
AP-CODE 2 [Not used]
8. Service Mode
1010