
COPIER > OPTION > FNC-SW
CDS-MEAP
1
Set to allow MEAP installation by admin
Detail
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit the user (administrator) to install MEAP applications and enable iR options
from CDS.
When 1 is set, Updater can be activated from Settings/Registration menu.
Use Case
When allowing the administrator to install MEAP applications and enable iR options from CDS
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Disabled, 1: Enabled
Default Value
1
Supplement/Memo
CDS: Contents Delivery System
CDS-UGW
1
Set to allow firmware update from UGW
Detail
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit update of the firmware from the UGW server.
When "1: Enabled" is set, Updater accepts the operation from the UGW server in cooperation with
CDS.
Use Case
When allowing update of the firmware from the UGW server
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Disabled, 1: Enabled
Default Value
It differs according to the location.
Supplement/Memo
CDS: Contents Delivery System
LOCLFIRM
1
Set to allow firmware update by file
Detail
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit the user (administrator) to update the firmware from the remote UI using
a local file.
This update is executed as a measure for vulnerability in emergency situations.
Use Case
When allowing the administrator to update the firmware using a file
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Disabled, 1: Enabled
Default Value
1
MC-FANSW
1
Setting of Controller Fan speed
Detail
To set full speed/half speed to the Controller Fan 1 and 2 .
When 1 is set, the heat exhaust efficiency is increased.
Use Case
- When HDD damage occurs multiple times
- When the machine is installed in a high temperature environment in which HDD damage is likely
to occur
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Half speed, 1: Full speed
Default Value
0
BXNUPLOG
2
[Not used]
8. Service Mode
908
Summary of Contents for imageRUNNER ADVANCE C5500 Series
