Canon imageRUNNER ADVANCE C5500 Series, Service Manual, Page: 1014 / 1331

COPIER > OPTION > USER
PDFD-MSW 2 Set output paper size: direct print PDF
Detail To set output paper size at direct print PDF.
Usually, the region defined by MediaBox is output. However, in some cases, the region defined
(trimmed) by CropBox is judged as output paper size depending on PDF file.
Set 1 when output result differs from what is defined at direct print PDF.
Use Case When preferring to output a PDF file with paper which size is defined by CropBox while the sizes
of MediaBox and CropBox are different
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: MediaBox (Normal), 1: CropBox
Default Value 0
SFT-OUT 2 Setting of offset priority delivery
Detail To set whether to deliver a job where offset and collate/offset group is set to the delivery destination
with offset function.
When 0 is set, a job is delivered to the delivery destination set in [Settings/Registration] even
though the offset function is not available.
When 1 is set, a job is delivered to the delivery destination with offset function even though a
delivery destination without offset function is set in [Settings/Registration].
Use Case
When preferring to deliver a job to the delivery destination with offset function
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Based on Output Tray Settings, 1: Priority on job settings (deliver to a delivery destination where
offset is possible)
Default Value
1
Additional Functions
Mode
Function Settings> Common> Paper Output Settings> Output Tray Settings
LGCY-SCP 2 Setting of PPA/secured print switch
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to use the PPA function or the conventional secured print function.
Set 0 when using the PPA function. The conventional secured print function is disabled.
Set 1 when using the conventional secured print function (when the EFI Controller is connected,
etc.). The PPA function is disabled.
When IMG-CONT is set to 3 or 4 for connecting the EFI Controller, the setting of this item becomes
1.
When this item is set to 0, the setting of UI-PPA becomes 1. When this item is set to 1, the setting
of UI-PPA becomes 0.
Use Case When using the conventional secured print function (when the EFI Controller is connected, etc.)
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The PPA function cannot be used when the EFI Controller is connected.
Display/Adj/Set Range 0 to 1
0: Use the PPA function, 1: Use the conventional secured print function
Default Value 0
Related Service Mode COPIER> OPTION> DSPLY-SW> UI-PPA
COPIER> OPTION> INT-FACE> IMG-CONT
Supplement/Memo
PPA (Personal Print Application): A function to hold print job. It contains the function of secured
print.
8. Service Mode
1000