Canon imageRUNNER ADVANCE C5500 Series, Service Manual, Page: 1006 / 1331

COPIER > OPTION > USER
LDAP-DEF 1 Initial condtn set of LDAP server search
Detail To set initial condition for search target attribute that is specified at the time of LDAP server Details
search.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5: No registration 1 (any setting),
6: No registration 2 (any setting)
Default Value 0
Related Service Mode COPIER> OPTION> USER> LDAP-SW
JA-DPI 2 Display of job archive record resolution
Detail To display the resolution of images for job archives recorded in jobs other than FAX reception and
I-Fax reception, etc.
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Use Case
Upon user's request
Adj/Set/Operate Method
N/A (Display only)
Caution
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Display/Adj/Set Range
0 to 3
0: No conversion, 1: 100 x 100 dpi, 2: 200 x 200 dpi, 3: 300 x 300 dpi
Default Value 3
JA-COMPR 2 Dspl job archive record compress ratio
Detail To display the compression ratio of images for job archives recorded in jobs other than FAX
reception and I-Fax reception, etc.
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Use Case Upon user's request
Adj/Set/Operate Method N/A (Display only)
Caution In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Display/Adj/Set Range 0 to 5
0: No conversion, 1: Compression ratio 1/4, 2: Compression ratio 1/8, 3: Compression ratio 1/16,
4: Compression ratio 1/32, 5: Compression ratio 1/64
Default Value 3
FREE-DSP 2 Display/hide of charge disable screen
Detail To set whether to display or hide the Use Charge Management screen for switching between
charge and no charge.
The hardware switch for switching charge/no charge in the Coin Manager enables the mode in
which all the services are available for free (store manager mode) by temporarily releasing the
charging system.
Even without the hardware switch, the mode can be switched with the software switch when it is
set to display the Use Charge Management screen in Settings/Registration.
Use Case
When enabling all the services to be provided for free by temporarily releasing the charging system
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Hide, 1: Display
Default Value
0
Additional Functions
Mode
Management Settings> Charge Management> Use Charge Management
8. Service Mode
992